 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SUBMINIATURE SOLID STATE LAMP AM27SYC08 SUPER BRIGHT YELLOW Features OSUBMINIATURE PACKAGE. OWIDE VIEWING ANGLE. OYOKE LEAD. Description The Super Bright Yellow device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. OLONG LIFE-SOLID STATE RELIABILITY. OLOW PACKAGE PROFILE. ORoHS COMPLIANT. OPACKAGE : 1000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1318 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP:1202000408 Selection Guide Iv (mcd) @ 20mA Min. AM27SYC08 SUPER BRIGHT YELLOW (InGaAIP) WATER CLEAR 110 Typ. 700 Viewing Angle 21/2 20 Part No. Dice Lens Type Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Typ. 590 588 28 25 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Yellow 125 30 150 5 -40C To +85C Units mW mA mA V SPEC NO: DSAD1318 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP:1202000408 Super Bright Yellow AM27SYC08 SPEC NO: DSAD1318 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP:1202000408 AM27SYC08 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD1318 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP:1202000408 |
Price & Availability of AM27SYC08
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |